View online Operation & user’s manual for Konica Minolta bizhub 224e Printer or simply click Download button to examine the Konica Minolta bizhub 224e guidelines offline on your desktop or laptop computer. Bizhub C224e The bizhub C224e brings you powerful features ordinary printer/copiers can’t equal - 22 ppm output in both color and B&W, optional single-pass dual scanning, modular finishing options and enhanced control panel that’s as simple as operating a tablet PC. The current model is the bizhub C258.
Advertising
bizhub 554e/454e/364e/284e/224e
2-37
2.13
NetWare Setting Function
2
2.13
NetWare Setting Function
When access to the machine by the administrator of the machine through the Administrator Settings is au- thenticated, the machine enables registration as the Print Server.
Making the NetWare Setting
0
For the procedure to call the Network Settings screen on the display, see steps 1 and 2 of page 2-29.
0
Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1
Konica Minolta Bizhub 224e User Manual Download
Call the Network Settings screen on the display from the control panel.
2
Touch [NetWare Settings].
3
Make the necessary settings.
4
Touch [OK].
% If a message appears that prompts you to turn OFF and ON the main power switch, turn OFF and
ON the main power switch. When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. If there is no wait period between turning the main power switch off, then on again, the machine may not function properly. Here is the sequence, through which the main power switch and sub power key are turned on and off: Turn off the sub power key ö Turn off the main power switch ö Turn on the main power switch ö Turn on the sub power key
This Installation Checklist contains items that are to be check by the Service Engineer installing this machine. The Service Engineer should check the following items, then explain each checked item to the administrator of the machine.
To Service Engineer
Make sure that each of these items is properly carried out by checking the box on the right of each item.
When the above steps have been properly carried out, the Service Engineer should make a copy of this page and give the original of this page to the administrator of the machine. The copy should be kept at the corre- sponding Service Representative for filing.
1.
Perform the following steps before installing this machine.
Completed
Check with the administrator to determine if the security functions of this machine should be enhanced. If the functions should be enhanced, check the following. If the security functions are not to be enhanced, quit the operation without checking the following.
I swear that I would never disclose information as it relates to the settings of this ma- chine to anybody, or perform malicious or intentional act during setup and service procedures for the machine.
When giving the User’s Guide Security Operations to the administrator of the ma- chine, check that the User’s Guide is the security-compatible version and explain to the administrator that it is security-compatible.
2.
After this machine is installed, refer to the Service Manual and perform the following steps.
Check that the Firmware version (MFP Controller, CheckSum) indicated in the Ser- vice Manual matches the values shown in the Firmware Version screen. If there is a mismatch in the Firmware version number, explain to the administrator of the machine that upgrading of the Firmware is necessary and perform upgrading of the Firmware.
Set the CE Password.
Make the service settings necessary for the Enhanced Security Mode.
Check that the SSD mounted on the machine is the type for the exclusive use for this machine.
Check that the Fax Kit has been mounted and set up properly, if fax functions are to be used.
3.
After this machine is installed, refer to this User’s Guide and perform the following steps.
Check that the Administrator Password has been set by the administrator of the ma- chine.
Check that the Encryption Key has been set by the administrator of the machine.
Let the administrator of the machine set Enhanced Security Mode to [ON].
The language, in which the contents of the User’s Guide Security Operations have been evaluated, is English. Explain the way how to get the manual in the language, in which it is evaluated.
Explain to the administrator that the settings for the security functions for this ma- chine have been specified.